WinRAR
Модератор: NetSkipper
Правила форума
Администрация не несет ответственности за размещенные на этом форуме сообщения.
Если сообщения как то ущемляют ваши права, обратитесь к администрации, и информация будет удалена с форума.
Администрация не несет ответственности за размещенные на этом форуме сообщения.
Если сообщения как то ущемляют ваши права, обратитесь к администрации, и информация будет удалена с форума.
- Topcon
- Друг форума
- Сообщения: 13021
- Зарегистрирован: 30.04.2005, 21:48
- smartphone: Samsung Note 8
- Откуда: конец географии - начало топографии
- Благодарил (а): 2 раза
-
Заслуженный участник покетовки
Даритель
WinRAR
WinRAR 3.62
Вышла новая версия WinRAR, популярного архиватора. В сети считается неоспоримым лидером. Оно и понятно, алгоритм сжатия формата RAR по праву считается одним из лучших. Удобный интерфейс, поддержка всех нужных форматов архивации и общее весьма высокое качество не оставляет шансов конкурентам.
WinRAR имеет полную поддержку форматов RAR и ZIP, а также может выполнять все основные операции с форматами: 7Z, ACE, ARJ, BZ2, CAB, GZ, JAR, LZH, TAR, UUE, Z и ISO (CD-имиджи). Умеет создавать самораспаковывающиеся архивы типа SFX.
Bugs fixed:
- Stack overflow vulnerability has been corrected in WinRAR module processing 7-Zip archives.
- WinRAR GZip module could set a wrong file date when unpacking GZip archives.
[hide=0]WinRAR 3.62>>[/hidden]
[hide=0]Дополнение>>[/hidden]
Вышла новая версия WinRAR, популярного архиватора. В сети считается неоспоримым лидером. Оно и понятно, алгоритм сжатия формата RAR по праву считается одним из лучших. Удобный интерфейс, поддержка всех нужных форматов архивации и общее весьма высокое качество не оставляет шансов конкурентам.
WinRAR имеет полную поддержку форматов RAR и ZIP, а также может выполнять все основные операции с форматами: 7Z, ACE, ARJ, BZ2, CAB, GZ, JAR, LZH, TAR, UUE, Z и ISO (CD-имиджи). Умеет создавать самораспаковывающиеся архивы типа SFX.
Bugs fixed:
- Stack overflow vulnerability has been corrected in WinRAR module processing 7-Zip archives.
- WinRAR GZip module could set a wrong file date when unpacking GZip archives.
[hide=0]WinRAR 3.62>>[/hidden]
[hide=0]Дополнение>>[/hidden]
Последний раз редактировалось Topcon 06.12.2006, 08:49, всего редактировалось 1 раз.
Samsung Galaxy Note 8
- ronen1999
- Пользователь
- Сообщения: 724
- Зарегистрирован: 24.11.2006, 19:52
- smartphone: Galaxy S3,1+1
- Откуда: Краёт
WinRAR 3.80 Final (Rus)
Комментарии излишни
Как сказал
Как сказал
BigWig писал(а):Архиватор всех времен и народов!
- С человеком нужно играть в "крестики-нолики". Если ты для него нолик, нужно ставить на нём крестик.
- NetSkipper
- Модератор
- Сообщения: 5175
- Зарегистрирован: 27.06.2005, 08:34
- smartphone: SM-G970F
- Откуда: Interstella 5555
- Благодарил (а): 27 раз
- Поблагодарили: 8 раз
-
Участник покетовки
Даритель
-
- Пользователь
- Сообщения: 161
- Зарегистрирован: 17.08.2008, 02:11
- smartphone: HTC Daimond
Re:
есть кушать здесь,NetSkipper писал(а):Кушать не просит?
А английская версия есть?
делаешь текстовый файл rarreg.key и кладешь его в папку с winrar-ом
Код: Выделить всё
RAR registration data
Federal Agency for Education
1000000 PC usage license
UID=b621cca9a84bc5deffbf
6412612250ffbf533df6db2dfe8ccc3aae5362c06d54762105357d
5e3b1489e751c76bf6e0640001014be50a52303fed29664b074145
7e567d04159ad8defc3fb6edf32831fd1966f72c21c0c53c02fbbb
2f91cfca671d9c482b11b8ac3281cb21378e85606494da349941fa
e9ee328f12dc73e90b6356b921fbfb8522d6562a6a4b97e8ef6c9f
fb866be1e3826b5aa126a4d2bfe9336ad63003fc0e71c307fc2c60
64416495d4c55a0cc82d402110498da970812063934815d81470829275
HTC Daimond, HTC Touch PRO, HP 614c, Мелафон у меня.
- NetSkipper
- Модератор
- Сообщения: 5175
- Зарегистрирован: 27.06.2005, 08:34
- smartphone: SM-G970F
- Откуда: Interstella 5555
- Благодарил (а): 27 раз
- Поблагодарили: 8 раз
-
Участник покетовки
Даритель
-
- Пользователь
- Сообщения: 161
- Зарегистрирован: 17.08.2008, 02:11
- smartphone: HTC Daimond
- NetSkipper
- Модератор
- Сообщения: 5175
- Зарегистрирован: 27.06.2005, 08:34
- smartphone: SM-G970F
- Откуда: Interstella 5555
- Благодарил (а): 27 раз
- Поблагодарили: 8 раз
-
Участник покетовки
Даритель
-
- Пользователь
- Сообщения: 3576
- Зарегистрирован: 24.04.2008, 12:40
- smartphone: 1+1 шестой
- Благодарил (а): 70 раз
- Поблагодарили: 24 раза
Re: WinRAR
WinRAR 3.90 ENG 32/64 bit (версия от 19 августа 2009 г)
ОС: Windows All
Язык: английский
Размер: 2 мб
Лекарство: key
WinRAR 3.90 ENG 32 bit
ОС: Windows All
Язык: английский
Размер: 2 мб
Лекарство: key
WinRAR 3.90 ENG 32 bit
-
- Ворчун
- Сообщения: 13505
- Зарегистрирован: 06.11.2007, 23:10
- smartphone: S10
- Благодарил (а): 7 раз
- Поблагодарили: 1 раз
-
Заслуженный участник покетовки
Даритель
Re: WinRAR
WinRAR 4.00 ENG 32/64 bit
полный комплект. Keygen копируем на Десктоп, запускаем и сохраняем rarreg.key тоже на Десктопе. А затем перетаскиваем его в папку с прогой.
Enjoy.
Пасс: [qrcode=4]israpda.com[/qrcode]
полный комплект. Keygen копируем на Десктоп, запускаем и сохраняем rarreg.key тоже на Десктопе. А затем перетаскиваем его в папку с прогой.
Enjoy.
Пасс: [qrcode=4]israpda.com[/qrcode]
-
- Пользователь
- Сообщения: 3576
- Зарегистрирован: 24.04.2008, 12:40
- smartphone: 1+1 шестой
- Благодарил (а): 70 раз
- Поблагодарили: 24 раза
Re: WinRAR
WinRAR 4.10 Final
Русская/английская зарегистрированная и портативная версии в одном установщике.
Особенности версии:
Изменения в версии 4.10:
Скачать WinRAR 4.10 Final (2,61 МБ):
Русская/английская зарегистрированная и портативная версии в одном установщике.
Особенности версии:
Спойлер
•Тип: установка (x86/x64) | распаковка portable
•Языки: английский | русский
•Лечение: проведено
•Информация: автоматический определение x86/x64
•Языки: английский | русский
•Лечение: проведено
•Информация: автоматический определение x86/x64
Изменения в версии 4.10:
Спойлер
1.WinRAR can create ZIP archives of practically any size. 2 GB archive size and 65535 file number ZIP limitations of previous WinRAR versions are not valid anymore.
2.WinRAR can create multivolume ZIP archives, which are also known as split ZIP files. ZIP volumes have names like 'volname.zip', 'volname.z01', 'volname.z02'. Use a volume with ".zip" file extension in all archive processing operations like starting extraction or opening an archive. Unlike RAR volumes, ZIP volumes cannot be self-extracting. WinRAR needs to have access to all ZIP volumes of multivolume file set at the same time, when creating or unpacking them. So it is impossible to create or unpack ZIP volumes on removable disks, one volume per disk. You need to create them all in the same folder.
3.Added the high precision file time support in ZIP archives. WinRAR can store and extract modification, creation and last access file time in ZIP archives with 100 nanosecond precision. You need to set "High precision modification time" option in "Time" part of archiving dialog to store all 3 times in archive. Set appropriate "File time" options in "Advanced" part of extraction dialog to choose times to extract.
4.Added support for Unicode names stored in ZIP extra field data. Different ZIP tools store Unicode names either in file header or in ZIP extra field and now WinRAR can correctly process both types of Unicode names.
5."Synchronize archive contents" option and -as command line switch are supported in ZIP format.
6.Modifications of switch -ag behavior:
◦ag can be used with all RAR and WinRAR commands, not just with archiving only;
◦'N' format character behavior differs in archiving and non-archiving operations. When archiving, it is incremented until the first unused name is found. In non-archiving operations like extracting it selects the existing archive preceding the first unused name;
◦'I' format character allows to specify minutes regardless of presence and position of 'H' (hours) in format string. It can be used instead of 'M' (minutes), when you wish to place minutes before hours or do not need hours at all.
7.By default, WinRAR proposes to update an archive if viewer modified an opened file or created any new files. New "Ignore modifications for" option in "Settings/Viewer" dialog allows to disable such behavior. You can enter one or several file masks separated by spaces here and WinRAR will not prompt to update an archive if file created or modified by viewer matches one of these masks.
8.Changes in volume size input field. Now you can select size units in the drop down list to the right of volume size. Previous way to define size modifiers, by entering 'k', 'm', etc. character after the numeric size value, is also supported.
9.Changes in "Predefined sizes" in "Define volume sizes" dialog. Floppies and ZIP disks are replaced by 5 MB and 100 MB volumes, added new entries for maximum FAT32 file size and for Blu-ray disks.
10.New "Wipe files if password is set" option in "Options" page of archiving dialog. If you prefer to always delete encrypted files securely, you can enable "Wipe files if password is set" in the default compression profile.
11.New "Wipe temporary files/Encrypted only" option in "Settings/Security". It allows to use a slower and more secure delete for temporary files extracted from archives identified by WinRAR as encrypted. Quick delete is used for all other temporary files.
12.Changes in "Convert archives" command:
◦now it is possible to convert encrypted archives. Previously "Convert archives" command skipped them. Though, if you still prefer to skip them, you can do it by enabling "Skip encrypted archives" option in "Convert archives" dialog. It might be useful if you wish to run the conversion command in unattended mode, avoiding password prompts;
◦special "rar2" archive type, which was specific for RAR 1.x and 2.x archives, is removed. Now "rar" archive type controls conversion of all versions of RAR archives. Since the convert command does not need to detect RAR archive version anymore, the initial search for archives is performed faster, resulting in shorter delay before displaying "Convert archives" dialog.
13.New -log[fmt][=name] switch allows to write archive and file names to log file in archiving command for RAR and ZIP formats and also in extracting, deleting and listing commands for RAR format. This switch is especially useful, when you need to further process an archive created with -ag or -v switches, because -log provides the archive name generated by WinRAR.
14.New -@[+] switch allows to process all parameters starting from '@' character either as file names (-@) or as file lists (-@+).
15."Setup program" SFX options are moved from "General" to "Setup" page of "Advanced SFX options" dialog. Both "Run after extraction" and "Run before extraction" are now multiline, so it is possible to specify several setup programs for same SFX archive.
16."SetupCode" SFX script command instructs SFX archive to wait for termination of setup program and return the exit code of setup program increased by 1000 as the exit code of SFX executable.
17.GUI equivalent of this command is "Wait and return exit code" option on "Setup" page of "Advanced SFX options" dialog.
18.SFX does not support "S" (create in the top level of Start Menu) "Shortcut" command mode anymore. Recent Windows versions do not allow programs to add items to the top of Start Menu.
19.Volume size in archiving and wizard dialogs can be specified as a decimal fraction. Decimal mark is defined by Windows regional settings. -v<size> command line switch also allows decimal fractions. In command line mode the dot (.) is always used as the decimal mark. For example, -v1.5g switch means 1.5 gigabytes.
2.WinRAR can create multivolume ZIP archives, which are also known as split ZIP files. ZIP volumes have names like 'volname.zip', 'volname.z01', 'volname.z02'. Use a volume with ".zip" file extension in all archive processing operations like starting extraction or opening an archive. Unlike RAR volumes, ZIP volumes cannot be self-extracting. WinRAR needs to have access to all ZIP volumes of multivolume file set at the same time, when creating or unpacking them. So it is impossible to create or unpack ZIP volumes on removable disks, one volume per disk. You need to create them all in the same folder.
3.Added the high precision file time support in ZIP archives. WinRAR can store and extract modification, creation and last access file time in ZIP archives with 100 nanosecond precision. You need to set "High precision modification time" option in "Time" part of archiving dialog to store all 3 times in archive. Set appropriate "File time" options in "Advanced" part of extraction dialog to choose times to extract.
4.Added support for Unicode names stored in ZIP extra field data. Different ZIP tools store Unicode names either in file header or in ZIP extra field and now WinRAR can correctly process both types of Unicode names.
5."Synchronize archive contents" option and -as command line switch are supported in ZIP format.
6.Modifications of switch -ag behavior:
◦ag can be used with all RAR and WinRAR commands, not just with archiving only;
◦'N' format character behavior differs in archiving and non-archiving operations. When archiving, it is incremented until the first unused name is found. In non-archiving operations like extracting it selects the existing archive preceding the first unused name;
◦'I' format character allows to specify minutes regardless of presence and position of 'H' (hours) in format string. It can be used instead of 'M' (minutes), when you wish to place minutes before hours or do not need hours at all.
7.By default, WinRAR proposes to update an archive if viewer modified an opened file or created any new files. New "Ignore modifications for" option in "Settings/Viewer" dialog allows to disable such behavior. You can enter one or several file masks separated by spaces here and WinRAR will not prompt to update an archive if file created or modified by viewer matches one of these masks.
8.Changes in volume size input field. Now you can select size units in the drop down list to the right of volume size. Previous way to define size modifiers, by entering 'k', 'm', etc. character after the numeric size value, is also supported.
9.Changes in "Predefined sizes" in "Define volume sizes" dialog. Floppies and ZIP disks are replaced by 5 MB and 100 MB volumes, added new entries for maximum FAT32 file size and for Blu-ray disks.
10.New "Wipe files if password is set" option in "Options" page of archiving dialog. If you prefer to always delete encrypted files securely, you can enable "Wipe files if password is set" in the default compression profile.
11.New "Wipe temporary files/Encrypted only" option in "Settings/Security". It allows to use a slower and more secure delete for temporary files extracted from archives identified by WinRAR as encrypted. Quick delete is used for all other temporary files.
12.Changes in "Convert archives" command:
◦now it is possible to convert encrypted archives. Previously "Convert archives" command skipped them. Though, if you still prefer to skip them, you can do it by enabling "Skip encrypted archives" option in "Convert archives" dialog. It might be useful if you wish to run the conversion command in unattended mode, avoiding password prompts;
◦special "rar2" archive type, which was specific for RAR 1.x and 2.x archives, is removed. Now "rar" archive type controls conversion of all versions of RAR archives. Since the convert command does not need to detect RAR archive version anymore, the initial search for archives is performed faster, resulting in shorter delay before displaying "Convert archives" dialog.
13.New -log[fmt][=name] switch allows to write archive and file names to log file in archiving command for RAR and ZIP formats and also in extracting, deleting and listing commands for RAR format. This switch is especially useful, when you need to further process an archive created with -ag or -v switches, because -log provides the archive name generated by WinRAR.
14.New -@[+] switch allows to process all parameters starting from '@' character either as file names (-@) or as file lists (-@+).
15."Setup program" SFX options are moved from "General" to "Setup" page of "Advanced SFX options" dialog. Both "Run after extraction" and "Run before extraction" are now multiline, so it is possible to specify several setup programs for same SFX archive.
16."SetupCode" SFX script command instructs SFX archive to wait for termination of setup program and return the exit code of setup program increased by 1000 as the exit code of SFX executable.
17.GUI equivalent of this command is "Wait and return exit code" option on "Setup" page of "Advanced SFX options" dialog.
18.SFX does not support "S" (create in the top level of Start Menu) "Shortcut" command mode anymore. Recent Windows versions do not allow programs to add items to the top of Start Menu.
19.Volume size in archiving and wizard dialogs can be specified as a decimal fraction. Decimal mark is defined by Windows regional settings. -v<size> command line switch also allows decimal fractions. In command line mode the dot (.) is always used as the decimal mark. For example, -v1.5g switch means 1.5 gigabytes.
- Topcon
- Друг форума
- Сообщения: 13021
- Зарегистрирован: 30.04.2005, 21:48
- smartphone: Samsung Note 8
- Откуда: конец географии - начало топографии
- Благодарил (а): 2 раза
-
Заслуженный участник покетовки
Даритель
Re: WinRAR
WinRAR 4.20 Beta 1
Русская/английская зарегистрированная и портативная версии в одном установщике!
Русская/английская зарегистрированная и портативная версии в одном установщике!
Samsung Galaxy Note 8
-
- Ворчун
- Сообщения: 13505
- Зарегистрирован: 06.11.2007, 23:10
- smartphone: S10
- Благодарил (а): 7 раз
- Поблагодарили: 1 раз
-
Заслуженный участник покетовки
Даритель
Re: WinRAR
Чой-то ругают его, редактирование внутре чего-то врёт.Topcon писал(а):WinRAR 4.20 Beta 1
- borissatan
- Пользователь
- Сообщения: 3334
- Зарегистрирован: 13.06.2007, 10:13
- smartphone: Нет
- Поблагодарили: 4 раза
-
Участник покетовки
-
- Ворчун
- Сообщения: 13505
- Зарегистрирован: 06.11.2007, 23:10
- smartphone: S10
- Благодарил (а): 7 раз
- Поблагодарили: 1 раз
-
Заслуженный участник покетовки
Даритель
Re: WinRAR
У соседей зарегистрировался Eugene Roshal, автор WinRAR-а.
И дал совет, как избавиться от проблем на версиях больше 4.0
Надо проверить.
Пардон!, автор WinRAR-а Александр Roshal. Запутался. Это брат что-ли?
И дал совет, как избавиться от проблем на версиях больше 4.0
отключить опции сохранения времени файлов
Пардон!, автор WinRAR-а Александр Roshal. Запутался. Это брат что-ли?