Что делает - при приходе СМС с паролем и командой шлет обратно координаты наладонника. Делает это как только получается определить координаты.
Кроме этого можно указать какие SIM можно использовать с прибором и тогда при установке чужой симки на заранее указанный номер уйдет СМСка.
И под конец можно сообщить грабителю, что ты "знаешь, что он делал прошлым летом"
В пользу проги могу сказать что рускоязыйный клуб енотоводов втыкает ее во все клубные прошивки (у меня стоит и работает)MobileJustice by A. Zlobin
MobileJustice is a Yet another antitheft software
First of all disclaimers:
The author of program is not responsible on any harm, damage or expenses caused
by MobileJustice application. Use it on your own risk. You have to follow local
Law restrictions.
Warning: Application can cause SMS messages sending and you will pay for them!!!
If certification check is not disabled in your firmware you need to instal SamplePrivDeveloper.cer
Application consists of four modules:
1. SimMon (sim card monitor, started at windows startup)
2. RemoteMonitor(parses incoming SMS messages and sending replies)
3. GpsReport (get GPS position and send it to phones listed in command line)
4. MJConfig (configuration utility)
Installation:
1. Copy CAB file to your device and run it.
2. MJConfig from programs and define your configuration.
MJConfig GUI Description
SimMon configuration section:
"Enable" checkbox
Enable/disable SimMonitor.
"Disp.MesgBox" checkbox
Display message box with message defined in "MsgBox text" textbox in case of
SIM card change detected.
"Allowed" list
A list of allowed SIM cards. You can add another SIM card by pressing "Add"
button.
"Report to" list
In case of SIM card change detected warning SMS messages will be send to all
Numbers in that list. Numbers should be entered in international format (i.e.
+79043322223)
RMon configuration:
"Enable" checkbox
Enable/disabling Remote Monitor.
"Pass phrase" editbox
Define password phrase for remote commands execution
Permitted commands for RMon:
"GPS"
Allow/deny get GPS coordinates commands
"MsgBox"
Allow/deny display message box command
"Loc Call"
Allow/deny remote execution of LocationCall.exe
SMS Requests:
Sms request should start with pass phrase configured in "Pass Phrase" edit box.
After pass phrase you can specify one or more commands.
Supported Commands:
+g
Get GPS coordinates (After Fix become available Phone will send SMS reply to
command message with own coordinates)
+m msg
Display message box with "msg" message
+l
Execute LocationCall.exe application
Examples:
Pass phrase = zlo, RMon enabled, GPS and MsgBox commands allowed
If you want to get GPS coordinates you should send next SMS message:
zlo +g
If you want phone to display message box you should send next SMS message:
zlo +m preved!!!
To perform both task simultaneously
zlo +g +m preved!!!
